Specter Detector

Power & Battery

• Battery Type: Lithium Polymer (Li-Po)
• Battery Capacity: 600mAh
• Battery Life: Up to 24 hours of continuous operation.
• Charging Time: Requires a quick 2-hour charge cycle.

LED Indicator System

The system utilizes a dual-bead configuration (one dedicated blue LED and one dual-color red/green LED) to communicate status:

Device StatusLED Indicator BehaviorActive OperationSteady blue light (Normal power status)Low Battery AlertFlashing blue light (Prompts when power drops to 20%)Charging in ProgressSolid red light combined with a flashing green lightFully ChargedSolid green light

Physical Dimensions & Architecture

• Length: 9.84 inches (approx. 25 cm)
• Width: 1.97 inches (approx. 5 cm)
• Hardware Architecture: Built with two dedicated LED beads—one independent blue bead for power/operational status, and one dual-color red/green bead for charging management.

The Specter Detector translates raw EMF data in real-time through a vivid, multi-colored LED array and five uniquely expressive red ghost icons. Use this scale to measure the strength of a spiritual presence:

• Level 1 (Green / 1 Ghost): Baseline / Dormant — Normal background EMF. No spiritual activity detected.
• Level 2 (Yellow / 2 Ghosts): Minor Fluctuations — Slight energy shifts. Could indicate the beginning of a manifestation or a weak presence.
• Level 3 (Orange / 3 Ghosts): Manifestation Imminent — Distinct, localized energy spike. A presence is likely drawing near.
• Level 4 (Red / 4 Ghosts): High Activity — Strong, localized EMF fluctuation. High probability of active spiritual interaction or a cold spot.
• Level 5 (Deep Red / 5 Ghosts): Peak Anomalous Surge — Maximum EMF spike. Severe spiritual manifestation occurring directly within the radar-dish sensor's field.

4. Field Usage Instructions

Step 1: Establish a Baseline

Before beginning your sweep, turn on the device in a known "quiet" area to establish the environment's baseline EMF. Take note of any permanent electronic interference (appliances, breaker boxes) so you don't mistake them for anomalous data.

Step 2: The Scanning Technique

Hold the device firmly by the contoured, non-slip grip. Extend the Steampunk Radar-dish sensor head outward. Sweep the room slowly in an "S" pattern, keeping your eyes on the Progressive EMF Indicator Lights.

Step 3: Tracking a Presence

If the multi-colored LED array scales up and the red ghost icons begin lighting up sequentially, you have crossed an EMF anomaly. Hold the device steady and follow the direction where the visual indicators peak to isolate the exact location of the presence.

5. Care & Safety Precautions

• Environmental Resistance: While the matte, ribbed grip prevents drops when startled, protect the sensor head and USB-C port from heavy moisture or extreme wet weather.
• Storage: Store in a cool, dry place. Avoid leaving the device in hot vehicles, as extreme temperatures can degrade the Lithium Polymer battery over time.
• The Mark of Quality: Your device features the official bronze center medallion depicting a classic paranormal investigator. Clean this and the radar dish gently with a microfiber cloth to maintain its finish.